ASRock WRX90 WS EVO AMD Ryzen Threadripper PRO 7000 WX-Series Socket sTR5 EEB Motherboard
-
Unique FeatureSuperb Productivity
– PCIe Gen5 (Graphics, M.2)
– Eight Channel DDR5
– USB4 Type-C Ports (40 Gb/s)
Rock-Solid Durability
– Ultra Low-Loss PCB
– 18+3+3 Power Phase, 110A SPS for VCore
– 20K Long-lasting Black Caps (high quality and conductive polymer capacitors)
Ultrafast Connectivity
– Dual Intel® 10G LAN
EZ Update
– ASRock Auto Driver Installer -
CPU– Supports AMD Ryzen™ Threadripper™ PRO Processors
– Supports AMD Socket sTR5
– Supports ASRock Hyper BCLK Engine -
Chipset– AMD WRX90
-
Memory– Eight Channel DDR5 Memory Technology
– 8 x DDR5 DIMM Slots*
– Supports DDR5 ECC, buffered memory (RDIMM/ RDIMM-3DS) up to 7600+(OC)
– Max. capacity of system memory: 2TB
*S3 (Sleep) mode is supported only when 1 / 2 / 4 DIMMs memory modules are installed. -
BIOS– 256Mb AMI UEFI Legal BIOS with GUI support
-
Graphics– Aspeed AST2600 BMC Controller
– 1 x DisplayPort 1.1a with max. resolution up to 1920×1200 @ 60Hz*
*DisplayPort 1.1a does not support audio function. -
Audio– 7.1 CH HD Audio with Content Protection (Realtek ALC1220 Audio Codec)
– Impedance Sensing on Rear Out port
– Individual PCB Layers for R/L Audio Channel
– Nahimic Audio -
LAN2 x 10 Gigabit LAN 100/1000/2500/5000/10000 Mb/s (Intel® X710-AT2)
– Support PXE 1 x Dedicated IPMI (Realtek RTL8211F) -
SlotsCPU:
– 7 x PCIe 5.0 x16 Slots (PCIE1/PCIE2/PCIE3/PCIE4/PCIE5/PCIE7 at x16; PCIE6 at x8)*
– 15μ Gold Contact in VGA PCIe Slots
*Supports NVMe SSD as boot disks -
StorageCPU:
– 1 x Blazing M.2 Socket (M2_1, Key M), supports type 2260/2280/22110 PCIe Gen5x4 (128 Gb/s) mode*
– 2 x MCIO Connectors (PCIe Gen5x4 or 4 x SATA3 6.0 Gb/s)
– 1 x SlimSAS SFF-8654 Connector (SLIM1) (PCIe Gen4x4 or 4 x SATA3 6.0 Gb/s)
Chipset:
– 1 x Hyper M.2 Socket (M2_2, Key M), supports type 2260/2280 PCIe Gen4x4 (64 Gb/s) mode*
– 1 x SlimSAS SFF-8654 Connector (SLIM2) (PCIe Gen4x4)
– 4 x SATA3 6.0 Gb/s Connectors
*Supports NVMe SSD as boot disks -
RAID– Supports RAID 0, RAID 1 and RAID 10 for SATA storage devices
– Supports RAID 0, RAID 1 and RAID 10 for M.2 NVMe storage devices*
*Requires additional M.2 NVMe expansion cards to support RAID 10 -
USBCPU:
– 2 x USB4 Type-C (Rear)
– 4 x USB 3.2 Gen2 Type-A (Rear)
Chipset:
– 1 x USB 3.2 Gen2x2 Type-C (Front)
– 4 x USB 3.2 Gen1 Type-A (2 Rear, 2 Front)
– 4 x USB 2.0 (Front)
*All USB ports support ESD Protection -
Connector– 2 x Thermistor Cable Headers
– 1 x Front VGA Header
– 1 x COM Port Header
– 1 x Power LED and Speaker Header
– 1 x Intelligent Platform Management Bus Header
– 1 x PSU SMBus Header
– 1 x BMC SMBus Header
– 1 x Auxiliary Panel Header
– 2 x Addressable LED Headers*
– 1 x CPU Fan Connector (4-pin)**
– 1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan Speed Control)***
– 3 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan Speed Control)****
– 1 x 24 pin ATX Power Connector (Hi-Density Power Connector)
– 1 x 3 pin ATX Power Connector*****
– 2 x 8 pin ATX 12V Power Connectors (Hi-Density Power Connector) (for Motherboard)******
– 2 x 6 pin PCIe 12V Power Connectors (Hi-Density Power Connector) (for Motherboard)******
– 2 x 6 pin Graphics 12V Power Connectors (Hi-Density Power Connector) (for PCIe card)*******
– 1 x Right Angle Front Panel Audio Connector
– 2 x USB 2.0 Headers (Support 4 USB 2.0 ports)
– 1 x USB 3.2 Gen1 Header (Supports 2 USB 3.2 Gen1 ports)
– 1 x Front Panel Type C USB 3.2 Gen2x2 Header (20 Gb/s)
– 2 x SGPIO Headers
– 1 x CPU HP-SMBus Connector
– 1 x Non Maskable Interrupt Button Header
– 1 x Dr. Debug with LED
– 1 x Power Button with LED
– 1 x Reset Button with LED
– 1 x Clear CMOS Button
*Support in total up to 5V/3A, 15W LED Strip
**CPU_FAN1 supports the fan power up to 1A (12W).
***CPU_FAN2/WP supports the fan power up to 2A (24W).
****CHA_FAN1~3/WP support the fan power up to 2A (24W).
*****Plug the Multi PSU Adaptor Cable that comes with the package to ATX_CON1 if you use a secondary PSU.
******It is required to connect both ATX12V1 and ATX12V2; otherwise, the system may not boot up properly.
It is required to connect all 8 pin and 6 pin 12V Power Connectors when overclocking.
*******It is required to connect 6 pin PCIE 12V Power Cables to either GFX_12V1 or GFX_12V2; otherwise, the system may not boot up properly. -
Rear Panel I/O– 1 x DisplayPort 1.1a
– 1 x Optical SPDIF Out Port
– 2 x USB4 Type-C Ports (40 Gb/s)*
– 4 x USB 3.2 Gen2 Type-A Ports (10 Gb/s)
– 2 x USB 3.2 Gen1 Type-A Ports
– 2 x RJ-45 LAN Ports
– 1 x RJ45 Dedicated IPMI LAN Port
– 1 x Line Out Jack (Gold Audio Jack)
– 1 x Microphone Input Jack (Gold Audio Jack)
*USB_TC1 supports USB PD 3.0 up to 9V@3A (27W) / 5V@3A (15W) charging; USB_TC2 supports USB PD 3.0 up to 5V@3A (15W) charging. -
Software and UEFISoftware
– ASRock Polychrome SYNC*
UEFI
– ASRock Full HD UEFI
– ASRock Auto Driver Installer
– ASRock Instant Flash
*These utilities can be downloaded from ASRock Live Update & APP Shop. -
Accessories– 1 x User Manual
– 1 x I/O Shield
– 4 x SATA Data Cables
– 2 x Thermistor Cables
– 1 x Multi PSU Adaptor Cable
– 2 x Screws for M.2 Sockets
– 2 x Standoffs for M.2 Sockets -
Form Factor– EEB Form Factor: 12.0-in x 13.0-in, 30.5 cm x 33.0cm
– 14 Layer PCB
– 2oz Copper PCB -
OS– Microsoft Windows® 11 64-bit