ASRock B760 Pro RS/D4 DDR4,LGA 1700 ATX Motherboard
-
Exclusive featuresRock-Solid Durability
– 7+1+1 phase power supply, VCore+GT 50A Dr.MOS
– Pre-installed I/O expansion card
– ASRock 4-layer PCB board POOL Technology
Ultrafast Connectivity
– 2.5 Gigabit LAN EZ Update
– ASRock Auto Driver Installer
EZ Troubleshooter
– ASRock power-on status check -
processor– Supports 13th and 12th generation and next-generation Intel ® Core™ processors (LGA1700)
– Supports Intel ® Hybrid Technology
– Supports Intel ® Turbo Boost Max 3.0 Technology
– Supports Intel ® Thermal Velocity Boost (TVB)
– Supports Intel ® Adaptive Boost Technology (ABT) -
chip– Intel ® B760
-
Memory– Dual channel DDR4 memory technology
– 4 x DDR4 slots
– Supports DDR4 non-ECC, un-buffered memory up to 5333+(OC) *
– Supports ECC UDIMM memory modules (non-ECC mode)
– System memory max Capacity: 128GB
– Supports Intel ® Extreme Memory Profile (XMP) 2.0 technology* 1DPC 1R up to 5333+ MHz (OC), native 3200 MHz.
1DPC 2R up to 4400+ MHz (OC), native 3200 MHz.
2DPC 1R up to 4266+ MHz (OC), native 3200 MHz.
2DPC 2R up to 4000+ MHz ( OC), native 3200 MHz. -
BIOS– 128Mb AMI UEFI Legal BIOS, supports graphical interface
-
built-in display– Intel ®
_
_ 5K 120Hz* Processors with built-in GPU functionality support Intel® UHD display chips with built-in visual enhancement functionality and display output. -
Sound effects– 7.1 channel high-fidelity audio (Realtek ALC897 audio codec)
– Nahimic Audio -
network– 2.5 Gigabit NIC 10/100/1000/2500 Mb/s
– Dragon RTL8125BG
– Supports Dragon 2.5 Gigabit NIC software
– Fully intelligent automatic bandwidth optimization
– Visual friendly UI interface
– Visual network usage statistics table
– Built-in gaming, browsing and streaming mode bandwidth optimization
– user-defined priority control
– 1 x PCIe 4.0 x16 slot (PCIE1), supports x16 mode *
Chipset:
– 1 x PCIe 4.0 x16 slot (PCIE3), supports x4 mode *
– 1 x PCIe 3.0 x16 slot (PCIE4), supports x1 Mode *
– 1 x PCIe 3.0 x1 slot (PCIE2) *
– 1 x M.2 slot (Key E), supports type 2230 WiFi/BT PCIe WiFi module and Intel ® CNVio/CNVio2 (Integrated WiFi/BT)
– Supports AMD CrossFire™
– 1 x Hyper M.2 slot (M2_1, Key M), supports type 2260/2280 PCIe Gen4x4 (64 Gb/s) mode* Chipset
:
– 1 x M.2 slot (M2_2, Key M), Support type 2260/2280 PCIe Gen4x2 (32 Gb/s) mode *
– 1 x Hyper M.2 slot (M2_3, Key M), Support type 2260/2280 PCIe Gen4x4 (64 Gb/s) mode *
– 4 x SATA3 6.0 Gb/s port
and supports NVMe SSD boot
– 1 x USB 3.2 Gen1 Type-C (rear)
– 7 x USB 3.2 Gen1 Type-A (5 Rear, 2 front)
– 4 x USB 2.0 (2 Rear, 2 front)
* All USB support ESD electrostatic protection
– 1 x Chassis power-on warning function header and speaker header
– 2 x RGB LED header *
– 2 x Programmable LED header **
– 1 x CPU fan port (4-pin) ***
– 1 x CPU/water pump fan interface (4-pin) (smart fan speed control) ****
– 5 x case/water pump fan interface (4-pin) (smart fan speed control) *** **
– 1 x 24-pin ATX power port
– 1 x 8-pin 12V power port (high-density power port) –
1 x 4-pin 12V power port (high-density power port)
– 1 x Front Panel Audio Ports
– 1 x Thunderbolt™ AIC port (5-pin) (supports ASRock Thunderbolt™ 4 AIC card) –
1 x USB 2.0 header (supports 2 USB 2.0 ports)
– 1 x USB 3.2 Gen1 header (supports 2 USB 3.2 Gen1 port)
– 1 x Front Type C USB 3.2 Gen2 header (10 Gb/s
** Supports up to 5V/3A, 15W LED light strips
*** CPU_FAN1 supports fan power up to 1A (12W).
**** CPU_FAN2/WP supports fan power up to 2A (24W) ).
***** CHA_FAN1~5/WP supports fan power up to 2A (24W).
CPU_FAN2/WP and CHA_FAN1~5/WP can automatically detect 3-pin or 4-pin fans.
– 1 x HDMI Port
– 1 x DisplayPort 1.4
– 1 x USB 3.2 Gen1 Type-C Port
– 5 x USB 3.2 Gen1 Type-A Port
– 2 x USB 2.0 Port
– 1 x RJ-45 Network Port
– HD Audio Jack: Line In/Front Speaker/Microphone
– ASRock Motherboard Utility (A-Tuning)
– ASRock Dragon 2.5 Gigabit LAN Software
– ASRock Polychrome SYNC *
UEFI
– ASRock EZ Mode
– ASRock Full HD UEFI
– ASRock My Favorite UEFI
– ASRock Auto Driver Installer
– ASRock Instant Flash
– ASRock Easy RAID Installer
– 2 x SATA data cable
– 4 x M.2 slot screws
– 1 x M.2 plug-in holder
– Supports ErP/EuP (requires a power supply that supports ErP/EuP)